Grinding Mill Machine

Production description of talc grinding mill machine:

• Brand: CLIRIK
• Model: HGM80, HGM90, HGM100, HGM125, and HGM1680L
• Capacity: 0.4 -30t/h
• Input size: 20 mm
• Finished size: 150~2500 meshes, 5-100 micron
• Power: 123-430 kw
• Warranty: a).one year against manufacturing defect;  b).offer lifetime consultation on problems occurred

Features: 

• High Efficiency; 
• Long lifecycle of spare parts; 
• High safety and reliability; 
• High fineness, flexible adjustment; 
• Environment-friendly

Application of talc grinding mill machine:

HGM Series talc grinding mill machine specializing in producing fine and super calcium carbonate powder of non-inflammable, non-explosive and brittle materials with Moh's hardness under six, such asvermiculite, vermiculite and vermiculite, calcium carbonate powder, calcium carbonate powder, calcium carbonate powder, calcium carbonate powder, calcium carbonate powder, rock phosphate, phosphate, serpentine, etc., totally more than 100 kinds of materials.

Working Principle of talc grinding mill machine:
The main bearing and each dial are driven by electro motor of main machine through reducer, and numbers of rollers, which are rolling in the ring, are driven by dial through plunger. After crushed by hammer crusher, the big materials become small ones and are sent to storage hopper by elevator and further sent to the middle of first dial evenly by the electromagnetic vibrating feeder and feeding pipe. The materials will be driven to the edge of dial by centrifugal force and fall down into the ring, crushed and grinded by roller, and become powder after production of three rings. The high pressure centrifugal blower will inhale air from outside and blow the crushed materials to classifier. The rotating turbo in the powder concentrator will make the coarse material return to the mill and reground, while the fineness will mix with the air and go into the cyclone and be discharged in the discharge bin, which is at the bottom of it. The air, which mixed with very little fineness, will be purified by impulse duster and discharged by blower and muffler.

Technical specification of talc grinding mill machine:

Note: This specification is just referencing, any changes are subject to the products. 

Introduction of bauxite grinding mill machine

Brand: CLIRIK
Type: bauxite grinding mill machine 
Models: HGM80, HGM90, HGM100, HGM125, and HGM1680L
Capacity: 0.4 -30t/h
Finished size: 150~2500 meshes, 9-100 um/mesh
Warranty: a).one year against manufacturing defect;  b).offer lifetime consultation on problems occurred.

Technical parameters of bauxite grinding mill machine

Applications of bauxite grinding mill machine
HGM bauxite grinding mill machine is the new type mining equipment for making micro powders, fine powders,which is widely applied in the industries of metallurgy, mining, chemistry, cement, construction, refractory materials, ceramics, and so on.
 
Production line of bauxite grinding mill machine  
The whole set HGM series bauxite grinding mill machine consists of hammer crusher, bucket elevator, storage hopper, vibrating feeder, main unit, inverter classifier, cyclone collector, pulse deduster system, high pressure positive blower, air compressors and electrical control systems.
 
Features & Advantages of bauxite grinding mill machine
1.High Efficiency
Under the same finished final size and the same motor power, the capacity of the machine is twice as much as jet mill, mixing grinder and ball mill, and energy consumption decreased 30%.
2.Long lifecycle of spare parts
The ring and roller are forged by special material with high utilization,the lifetime can reach 2-5 years for grinding calcite carbonate.
3.High safety and reliability
As no rolling bearings or screws in grinding cavity, there are no problems caused by bolts shedding or rapid wear of bearings and seal components.
4.High fineness, flexible adjustment
The final fineness of the grinding materials can be adjusted between 325 meshes and 2500 mesh (47-5 micron), and the product fineness can reach D97-5um.
5.Environment-friendly
 

Production description of coal grinding mill machine:

• Brand: CLIRIK
• Model: HGM80, HGM90, HGM100, HGM125, and HGM1680L
• Capacity: 0.4 -30t/h
• Input size: 20 mm
• Finished size: 150~2500 meshes, 5-100 micron
• Power: 123-430 kw
• Warranty: a).one year against manufacturing defect;  b).offer lifetime consultation on problems occurred

Features: 

• High Efficiency; 
• Long lifecycle of spare parts; 
• High safety and reliability; 
• High fineness, flexible adjustment; 
• Environment-friendly

Application of coal grinding mill machine:

HGM Series coal grinding mill machine specializing in producing fine and super calcium carbonate powder of non-inflammable, non-explosive and brittle materials with Moh's hardness under six, such asvermiculite, vermiculite and vermiculite, calcium carbonate powder, calcium carbonate powder, calcium carbonate powder, calcium carbonate powder, calcium carbonate powder, rock phosphate, phosphate, serpentine, etc., totally more than 100 kinds of materials.

Working Principle of coal grinding mill machine:
The main bearing and each dial are driven by electro motor of main machine through reducer, and numbers of rollers, which are rolling in the ring, are driven by dial through plunger. After crushed by hammer crusher, the big materials become small ones and are sent to storage hopper by elevator and further sent to the middle of first dial evenly by the electromagnetic vibrating feeder and feeding pipe. The materials will be driven to the edge of dial by centrifugal force and fall down into the ring, crushed and grinded by roller, and become powder after production of three rings. The high pressure centrifugal blower will inhale air from outside and blow the crushed materials to classifier. The rotating turbo in the powder concentrator will make the coarse material return to the mill and reground, while the fineness will mix with the air and go into the cyclone and be discharged in the discharge bin, which is at the bottom of it. The air, which mixed with very little fineness, will be purified by impulse duster and discharged by blower and muffler.

Technical specification of coal grinding mill machine:

Note: This specification is just referencing, any changes are subject to the products. 

Production description of mica grinding mill machine:

Brand: CLIRIK

Model: HGM80, HGM90, HGM100, HGM125, and HGM1680L

Capacity: 0.4 -30t/h

Input size: 20 mm

Finished size: 150~2500 meshes, 5-100 micron

Power: 123-430 kw

Warranty: a).one year against manufacturing defect;  b).offer lifetime consultation on problems occurred

Features: 1.High Efficiency;  2.Long lifecycle of spare parts;  3.High safety and reliability;  4.High fineness, flexible adjustment;  5.Environment-friendly

Application of mica grinding mill machine:

HGM Series mica grinding mill machine specializing in producing fine and super calcium carbonate powder of non-inflammable, non-explosive and brittle materials with Moh's hardness under six, such asvermiculite, vermiculite and vermiculite, calcium carbonate powder, calcium carbonate powder, calcium carbonate powder, calcium carbonate powder, calcium carbonate powder, rock phosphate, phosphate, serpentine, etc., totally more than 100 kinds of materials.

Working Principle of mica grinding mill machine:
The main bearing and each dial are driven by electro motor of main machine through reducer, and numbers of rollers, which are rolling in the ring, are driven by dial through plunger. After crushed by hammer crusher, the big materials become small ones and are sent to storage hopper by elevator and further sent to the middle of first dial evenly by the electromagnetic vibrating feeder and feeding pipe. The materials will be driven to the edge of dial by centrifugal force and fall down into the ring, crushed and grinded by roller, and become powder after production of three rings. The high pressure centrifugal blower will inhale air from outside and blow the crushed materials to classifier. The rotating turbo in the powder concentrator will make the coarse material return to the mill and reground, while the fineness will mix with the air and go into the cyclone and be discharged in the discharge bin, which is at the bottom of it. The air, which mixed with very little fineness, will be purified by impulse duster and discharged by blower and muffler.

Technical specification of mica grinding mill machine:

Note: This specification is just referencing, any changes are subject to the products. 

Production description of iron ore grinding mill machine:

• Brand: CLIRIK
• Model: HGM80, HGM90, HGM100, HGM125, and HGM1680L
• Capacity: 0.4 -30t/h
• Input size: 20 mm
• Finished size: 150~2500 meshes, 5-100 micron
• Power: 123-430 kw
• Warranty: a).one year against manufacturing defect;  b).offer lifetime consultation on problems occurred

Features: 

• High Efficiency; 
• Long lifecycle of spare parts; 
• High safety and reliability; 
• High fineness, flexible adjustment; 
• Environment-friendly
  

Application of iron ore grinding mill machine:

HGM series iron ore grinding mill machine specializing in producing fine and super calcium carbonate powder of non-inflammable, non-explosive and brittle materials with Moh's hardness under six, such asvermiculite, vermiculite and vermiculite, calcium carbonate powder, calcium carbonate powder, calcium carbonate powder, calcium carbonate powder, calcium carbonate powder, rock phosphate, phosphate, serpentine, etc., totally more than 100 kinds of materials.

Working Principle of iron ore grinding mill machine:
The main bearing and each dial are driven by electro motor of main machine through reducer, and numbers of rollers, which are rolling in the ring, are driven by dial through plunger. After crushed by hammer crusher, the big materials become small ones and are sent to storage hopper by elevator and further sent to the middle of first dial evenly by the electromagnetic vibrating feeder and feeding pipe. The materials will be driven to the edge of dial by centrifugal force and fall down into the ring, crushed and grinded by roller, and become powder after production of three rings. The high pressure centrifugal blower will inhale air from outside and blow the crushed materials to classifier. The rotating turbo in the powder concentrator will make the coarse material return to the mill and reground, while the fineness will mix with the air and go into the cyclone and be discharged in the discharge bin, which is at the bottom of it. The air, which mixed with very little fineness, will be purified by impulse duster and discharged by blower and muffler.

Technical specification of iron ore grinding mill machine:

Note: This specification is just referencing, any changes are subject to the products. 

Production description of dolomite grinding mill machine:

Features: 

Application of dolomite grinding mill machine:

HGM Series dolomite grinding mill machine specializing in producing fine and super calcium carbonate powder of non-inflammable, non-explosive and brittle materials with Moh's hardness under six, such asvermiculite, vermiculite and vermiculite, calcium carbonate powder, calcium carbonate powder, calcium carbonate powder, calcium carbonate powder, calcium carbonate powder, rock phosphate, phosphate, serpentine, etc., totally more than 100 kinds of materials.

Working Principle of dolomite grinding mill machine:
The main bearing and each dial are driven by electro motor of main machine through reducer, and numbers of rollers, which are rolling in the ring, are driven by dial through plunger. After crushed by hammer crusher, the big materials become small ones and are sent to storage hopper by elevator and further sent to the middle of first dial evenly by the electromagnetic vibrating feeder and feeding pipe. The materials will be driven to the edge of dial by centrifugal force and fall down into the ring, crushed and grinded by roller, and become powder after production of three rings. The high pressure centrifugal blower will inhale air from outside and blow the crushed materials to classifier. The rotating turbo in the powder concentrator will make the coarse material return to the mill and reground, while the fineness will mix with the air and go into the cyclone and be discharged in the discharge bin, which is at the bottom of it. The air, which mixed with very little fineness, will be purified by impulse duster and discharged by blower and muffler.

Technical specification of dolomite grinding mill machine:

Note: This specification is just referencing, any changes are subject to the products. 

Production description of limestone grinding mill machine:

• Brand: CLIRIK
• Model: HGM80, HGM90, HGM100, HGM125, and HGM1680L
• Capacity: 0.4 -30t/h
• Input size: 20 mm
• Finished size: 150~2500 meshes, 5-100 micron
• Power: 123-430 kw
• Warranty: a).one year against manufacturing defect;  b).offer lifetime consultation on problems occurred

Features: 

• High Efficiency; 
• Long lifecycle of spare parts; 
• High safety and reliability; 
• High fineness, flexible adjustment; 
• Environment-friendly

Application of limestone grinding mill machine:

HGM Series limestone grinding mill machine specializing in producing fine and super calcium carbonate powder of non-inflammable and brittle materials with Moh's hardness under six, such asvermiculite, vermiculite and vermiculite, calcium carbonate powder, calcium carbonate powder, calcium carbonate powder, calcium carbonate powder, calcium carbonate powder, rock phosphate, phosphate, serpentine, etc., totally more than 100 kinds of materials.

Working Principle of limestone grinding mill machine:
The main bearing and each dial are driven by electro motor of main machine through reducer, and numbers of rollers, which are rolling in the ring, are driven by dial through plunger. After crushed by hammer crusher, the big materials become small ones and are sent to storage hopper by elevator and further sent to the middle of first dial evenly by the electromagnetic vibrating feeder and feeding pipe. The materials will be driven to the edge of dial by centrifugal force and fall down into the ring, crushed and grinded by roller, and become powder after production of three rings. The high pressure centrifugal blower will inhale air from outside and blow the crushed materials to classifier. The rotating turbo in the powder concentrator will make the coarse material return to the mill and reground, while the fineness will mix with the air and go into the cyclone and be discharged in the discharge bin, which is at the bottom of it. The air, which mixed with very little fineness, will be purified by impulse duster and discharged by blower and muffler.

Technical specification of limestone grinding mill machine:

Note: This specification is just referencing, any changes are subject to the products. 

Production description of CaCO3 grinding mill machine:

• Brand: CLIRIK
• Model: HGM80, HGM90, HGM100, HGM125, and HGM1680L
• Capacity: 0.4 -30t/h
• Input size: 20 mm
• Finished size: 150~2500 meshes, 5-100 micron
• Power: 123-430 kw
• Warranty: a).one year against manufacturing defect;  b).offer lifetime consultation on problems occurred
  

Features: 

• High Efficiency; 
• Long lifecycle of spare parts; 
• High safety and reliability; 
• High fineness, flexible adjustment; 
• Environment-friendly

Application of CaCO3 grinding mill machine:

HGM Series CaCO3 grinding mill machine specializing in producing fine and super calcium carbonate powder of non-inflammable and brittle materials with Moh's hardness under six, such asvermiculite, vermiculite and vermiculite, calcium carbonate powder, calcium carbonate powder, calcium carbonate powder, calcium carbonate powder, calcium carbonate powder, rock phosphate, phosphate, serpentine, etc., totally more than 100 kinds of materials.

Working Principle of CaCO3 grinding mill machine:

The main bearing and each dial are driven by electro motor of main machine through reducer, and numbers of rollers, which are rolling in the ring, are driven by dial through plunger. After crushed by hammer crusher, the big materials become small ones and are sent to storage hopper by elevator and further sent to the middle of first dial evenly by the electromagnetic vibrating feeder and feeding pipe. The materials will be driven to the edge of dial by centrifugal force and fall down into the ring, crushed and grinded by roller, and become powder after production of three rings. The high pressure centrifugal blower will inhale air from outside and blow the crushed materials to classifier. The rotating turbo in the powder concentrator will make the coarse material return to the mill and reground, while the fineness will mix with the air and go into the cyclone and be discharged in the discharge bin, which is at the bottom of it. The air, which mixed with very little fineness, will be purified by impulse duster and discharged by blower and muffler.

Technical specification of CaCO3 grinding mill machine:

Note: This specification is just referencing, any changes are subject to the products. 

Production description of barite grinding mill machine:

• Brand: CLIRIK
• Model: HGM80, HGM90, HGM100, HGM125, and HGM1680L
• Capacity: 0.4 -30t/h
• Input size: 20 mm
• Finished size: 150~2500 meshes, 5-100 micron
• Power: 123-430 kw
• Warranty: a).one year against manufacturing defect;  b).offer lifetime consultation on problems occurred
  

Features: 

• High Efficiency; 
• Long lifecycle of spare parts; 
• High safety and reliability; 
• High fineness, flexible adjustment; 
• Environment-friendly

Application of barite grinding mill machine:

HGM Series barite grinding mill specializing in producing fine and super calcium carbonate powder of non-inflammable and brittle materials with Moh's hardness under six, such asvermiculite, vermiculite and vermiculite, calcium carbonate powder, calcium carbonate powder, calcium carbonate powder, calcium carbonate powder, calcium carbonate powder, rock phosphate, phosphate, serpentine, etc., totally more than 100 kinds of materials.

Working Principle of barite grinding mill machine:
The main bearing and each dial are driven by electro motor of main machine through reducer, and numbers of rollers, which are rolling in the ring, are driven by dial through plunger. After crushed by hammer crusher, the big materials become small ones and are sent to storage hopper by elevator and further sent to the middle of first dial evenly by the electromagnetic vibrating feeder and feeding pipe. The materials will be driven to the edge of dial by centrifugal force and fall down into the ring, crushed and grinded by roller, and become powder after production of three rings. The high pressure centrifugal blower will inhale air from outside and blow the crushed materials to classifier. The rotating turbo in the powder concentrator will make the coarse material return to the mill and reground, while the fineness will mix with the air and go into the cyclone and be discharged in the discharge bin, which is at the bottom of it. The air, which mixed with very little fineness, will be purified by impulse duster and discharged by blower and muffler.

Technical specification of barite grinding mill machine:

Note: This specification is just referencing, any changes are subject to the products. 

Production description of marble grinding mill:

• Brand: CLIRIK
• Model: HGM80, HGM90, HGM100, HGM125, and HGM1680L
• Capacity: 0.4 -30t/h
• Input size:  0-20 mm
• Finished size: 150~2500 meshes, 5-100 micron
• Power: 123-430 kw
• Warranty: a).one year against manufacturing defect;  b).offer lifetime consultation on problems occurred

Features: 

• High Efficiency; 
• Long lifecycle of spare parts; 
• High safety and reliability; 
• High fineness, flexible adjustment; 
• Environment-friendly

Application of marble grinding mill:

HGM series marble grinding mill machine specializing in producing fine and super calcium carbonate powder of non-inflammable and brittle materials with Moh's hardness under six, such asvermiculite, vermiculite and vermiculite, calcium carbonate powder, calcium carbonate powder, calcium carbonate powder, calcium carbonate powder, calcium carbonate powder, rock phosphate, phosphate, serpentine, etc., totally more than 100 kinds of materials.

Working Principle of marble grinding mill:
The main bearing and each dial are driven by electro motor of main machine through reducer, and numbers of rollers, which are rolling in the ring, are driven by dial through plunger. After crushed by hammer crusher, the big materials become small ones and are sent to storage hopper by elevator and further sent to the middle of first dial evenly by the electromagnetic vibrating feeder and feeding pipe. The materials will be driven to the edge of dial by centrifugal force and fall down into the ring, crushed and grinded by roller, and become powder after production of three rings. The high pressure centrifugal blower will inhale air from outside and blow the crushed materials to classifier. The rotating turbo in the powder concentrator will make the coarse material return to the mill and reground, while the fineness will mix with the air and go into the cyclone and be discharged in the discharge bin, which is at the bottom of it. The air, which mixed with very little fineness, will be purified by impulse duster and discharged by blower and muffler.

Technical specification of marble grinding mill:

Note: This specification is just referencing, any changes are subject to the products.

Production description of calcite powder grinding machine:

Warranty:

Features:

Application of calcite powder grinding machine:

HGM Series calcite powder grinding machine specializing in producing fine and super calcium carbonate powder of non-inflammable brittle materials with Moh's hardness under six, such asvermiculite, vermiculite and vermiculite, calcium carbonate powder, calcium carbonate powder, calcium carbonate powder, calcium carbonate powder, calcium carbonate powder, rockphosphate, phosphate, serpentine, etc., totally more than 100 kinds of materials.

Working Principle of calcite powder grinding machine:

The main bearing and each dial are driven by electromotor of main machine through reducer, and numbers of rollers, which are rolling in the ring, are driven by dial through plunger. After crushed by hammer crusher, the big materials become small ones and are sent to storage hopper by elevator and further sent to the middle of first dial evenly by the electromagnetic vibrating feeder and feeding pipe. The materials will be driven to the edge of dial by centrifugal force and fall down into the ring, crushed and grinded by roller, and become powder after production of three rings. The high pressure centrifugal blower will inhale air from outside and blow the crushed materials to classifier. The rotating turbo in the powder concentrator will make the coarse material return to the mill and reground, while the fineness will mix with the air and go into the cyclone and be discharged in the discharge bin, which is at the bottom of it. The air, which mixed with very little fineness, will be purified by impulse duster and discharged by blower and muffler.

Technical specification of calcite powder grinding machine:

Note: This specification is just referencing, any changes are subject to the products. 

Established in the year 2010, we, an ISO 9001:2008, are a leading manufacturer, supplier, trader and exporter of Talc Raymond Mill Machine. The offered grinding mill machine is engineered by adroit technocrats using quality tested components and advanced technology. Known for consistent performance, longer functional life, sturdy construction and high strength, our offered Talc Raymond Mill Machine is also known as talc micro powder grinding machine that finds its usage in various applications. 

We are a leading manufacturer of Talc Raymond Mill in Shanghai, China. As a professionally managed manufacturer of this kind of machine, we have been in this line for many years, and now our spread over the world for the good quality and competitive prices.

Talc Raymond mill machine (industrial grinding machine) devices:
Talc Powder mill machine (industrial grinding machine) mainly consist of hammer crusher, micro powder main unit, Frequency conversion classifier, powder collector, pulse dust cleaner, high pressure positive blower, air compressor, muffler, electrical apparatus control system, sound-proof room, crusher, bucket elevator, storage hopper, and vibrating feeder.

Features :
Finished powder products are in the 30-425 meshes, 0.613-0.033 mm, and yield can be up to 1-20 tons per hour. There are five types of Shanghai Clirik YGM&MTM series manufacture grinding mill, they are HYGM7815,YGM8314,YGM9517,YGM4121,MTM1600.

Application :
YGM&MTM series talc Raymond Mill machine for glass pigment three roller mills is widely used in the fields of metallurgy, construction, chemical industry, mining, highway construction etc,. It is suitable for processing various non-flammable and non-explosive materials with Moh's hardness less than 9.3 and humidity less than 6%, such as quartz, feldspar, barite, calcite carbonate, lime, limestone, talc, ceramic, iron kaolin, carborundum, bauxite, kaolin phosphate, coal and other materials, about 400 kinds of materials in total.

Specification :
Model and technical data of Talc Raymond mill 

We are a prestigious name in this industry, engaged in manufacturing, supplying, trading and exporting the best quality HGM Series Ultrafine Grinding Mill Machine. The machine we offer is a new type mining machine for making fine powders, micro powder. These powders are extensively applied in a plethora of industries such as mining, cement, metallurgy,  chemistry, ceramics, construction, refractory materials, etc. Engineered and developed with utmost precision, Our Ultrafine Grinding Mill Machine is reckoned for its long functional life, sturdy construction, cost effectiveness and low maintenance cost.

Features :

After crushed by hammer crusher, the large materials are crushed into small ones and sent to storage hopper by elevator, and then evenly sent to the upper distribution plate of the turnplate by vibrating feeder and sloping feeding pipe.

When the grinding mill is at work, all the grinding rollers are rolling in the ring, and the materials are driven to the edge of the turn-plate by the centrifugal force and fall down into the grinding chambers where the materials are repeatedly pressed, crushed and grinded by the rollers.

The high-pressure air blower constantly inhales air within the grinding mill and, in turn, the airflow with crushed materials are brought to the classifier whose high-speed impeller will screen the airflow: the unqualified particle size will fall and return to the mill for being reground while the qualified particle size mixed with air will go into the cyclone powder collector. Most of the qualified powders will fall and exit from the discharging valve at the bottom; a small proportion of the fine powders, with airflow, moves to the dust cleaner, and clings to the surface of the filter bags. At the same time, the fine powders clinging to the surface fall down by the sudden vibration of the filter bags, which is caused by the instantly ejected high-pressure gas controlled by the pulse valve. The materials from the above two lots are sent by the conveyor at the bottom to get finished powders packed. In addition, filtered clean air will be emitted from the air outlet of muffler in the end.

Application :

Specification :

Note : This specification is just referencing, any changes are subject to the products.

Established in the year 2010, we, an ISO 9001:2008, are a leading manufacturer, supplier, trader and exporter of Calcium Carbonate Raymond Mill Machine. The offered grinding mill machine is engineered by adroit technocrats using quality tested components and advanced technology. Known for consistent performance, longer functional life, sturdy construction and high strength, our offered Calcium Carbonate Raymond Mill Machine is also known as talc micro powder grinding machine that finds its usage in various applications. 

We are a leading manufacturer of Talc Raymond Mill in Shanghai, China. As a professionally managed manufacturer of this kind of machine, we have been in this line for many years, and now our spread over the world for the good quality and competitive prices.

Calcium Carbonate Raymond Mill Machine (industrial grinding machine) devices:
Calcium Carbonate Raymond Mill Machine (industrial grinding machine) mainly consist of hammer crusher, micro powder main unit, Frequency conversion classifier, powder collector, pulse dust cleaner, high pressure positive blower, air compressor, muffler, electrical apparatus control system, sound-proof room, crusher, bucket elevator, storage hopper, and vibrating feeder.

Features :
Finished powder products are in the 30-425 meshes, 0.613-0.033 mm, and yield can be up to 1-20 tons per hour. There are five types of Shanghai Clirik YGM&MTM series manufacture grinding mill, they are HYGM7815,YGM8314,YGM9517,YGM4121,MTM1600.

Application :
YGM&MTM series Calcium Carbonate Raymond Mill Machine for glass pigment three roller mills is widely used in the fields of metallurgy, construction, chemical industry, mining, highway construction etc,. It is suitable for processing various non-flammable and non-explosive materials with Moh's hardness less than 9.3 and humidity less than 6%, such as quartz, feldspar, barite, calcite carbonate, lime, limestone, talc, ceramic, iron kaolin, carborundum, bauxite, kaolin phosphate, coal and other materials, about 400 kinds of materials in total.

Specification :
Model and technical data of Calcium Carbonate Raymond Mill Machine

We are a noteworthy manufacturer, supplier, trader and exporter of highly appreciated Fine Powder Grinding Machine. The offered grinding machine is well-equipped with various components that includes main unit, dust cleaner, powder collector, blower, muffler, classifier, hammer crusher (can be replaced by jaw crusher), vibrating feeder,  sound-proof room, storage hopper, bucket elevator, and so on. Our offered Fine Powder Grinding Machine is highly acclaimed amongst customers for its various features like high safety, high efficiency and long life cycle of grinding machine spare parts.

Application :

There are five types of Shanghai CLIRIK fine powder grinding machine, they are HGM80, HGM90, HGM100, HGM100125 and HGM1680L. The finished production fineness can be reached 150 meshes~2500 meshes, 5-100 micron. The capacity (ton/hour) ranges from 0.4T/H to 30T/H. CLIRIK ore mineral crushing, screening, fine powder grinding machine has been exported to many countries which includes China, India, Pakistan, Malaysia, Vietnam, Thailand, Egypt, Nigeria, South Africa, Brazil, Canada, Columbia, Chile, Australia, Russia and so on.

Specification :

Note : This specification is just referencing, any changes are subject to the products.

With the support of diligent and adroit team members, we have been able to manufacture, supply, trade and export grade-A Micro Powder Grinding Mill. The offered grinding equipment is best suitable for super-fine grinding variety of materials include marble, bartie, dolomite, mud, pigment, graphite and many more. Tested on varied quality parameters, this Micro Powder Grinding Mill is reckoned for its highly security & reliability, long working life, low power consumption, high efficiency and the best market prices

Features: 

Application :

The purpose of the Micro power Grinding Equipment is for super-fine grinding materials with hardness less than 6 in Moh's scale and humidity less than 6 percent such as kaolin, limestone, Calcite, Marble, Talcum, Bartie, Gypsum, Dolomite, Bentonite, Mud, Mica, Pyrophyllite, Sepiolite, Diatomite, Graphite, Alunite, Fluorite, Posasslum Feldspar, Phosphoric, Pigment and so on. The granularity of the end products is 325-2500 meshes (0.44-0.55 mm)

Specification :

We are an eminent manufacturer, supplier, trader and exporter of HGM series stone powder grinding machine that is the new type mining machine for making fine powders, micro powders, which is massively applied in the industries of chemistry, cement, metallurgy, ceramics,mining, construction, refractory materials and so on. Reckoned for its longer functional life and sturdy structure, customer can get this Stone Powder Grinding Machine at marginal prices.

Features :

High Efficiency.
Under the same finished final size and the same motor power, the capacity of the machine is twice as much as jet mill, mixing grinder and ball mill, and energy consumption decreased 30%.

Long life-cycle of spare parts.
The ring and roller are forged by special material with high utilization,the lifetime can reach 2-5 years for grinding calcite carbonate.

High safety and reliability.
As no rolling bearings or screws in grinding cavity, there are no problems caused by bolts shedding or rapid wear of bearings and seal components.

High fineness, flexible adjustment.
The final fineness of the grinding materials can be adjusted between 325 meshes and 2500 mesh (47-5 micron), and the product fineness can reach D97<5m.

Environment-friendly.

Application :

HGM series Stone Powder Grinding Machines is the new type mining equipment for making micro powders, fine powders, which is widely applied in the industries of metallurgy, mining, chemistry, cement, construction, refractory materials, ceramics, and so on

Specification :

Note: This specification is just referencing, any changes are subject to the products.

Established in the year 2010, we, an ISO 9001:2008, are a leading manufacturer, supplier, trader and exporter of Zeolite Raymond Mill Machine. The offered grinding mill machine is engineered by adroit technocrats using quality tested components and advanced technology. Known for consistent performance, longer functional life, sturdy construction and high strength, our offered Zeolite Raymond Mill Machine is also known as talc micro powder grinding machine that finds its usage in various applications. 

We are a leading manufacturer of Talc Raymond Mill in Shanghai, China. As a professionally managed manufacturer of this kind of machine, we have been in this line for many years, and now our spread over the world for the good quality and competitive prices.

Zeolite Raymond mill machine (industrial grinding machine) devices:
Zeolite Raymond mill machine (industrial grinding machine) mainly consist of hammer crusher, micro powder main unit, Frequency conversion classifier, powder collector, pulse dust cleaner, high pressure positive blower, air compressor, muffler, electrical apparatus control system, sound-proof room, crusher, bucket elevator, storage hopper, and vibrating feeder.

Features :
Finished powder products are in the 30-425 meshes, 0.613-0.033 mm, and yield can be up to 1-20 tons per hour. There are five types of Shanghai Clirik YGM&MTM series manufacture grinding mill, they are HYGM7815,YGM8314,YGM9517,YGM4121,MTM1600.

Application :
YGM&MTM series zaolite Raymond Mill machine for glass pigment three roller mills is widely used in the fields of metallurgy, construction, chemical industry, mining, highway construction etc,. It is suitable for processing various non-flammable and non-explosive materials with Moh's hardness less than 9.3 and humidity less than 6%, such as quartz, feldspar, barite, calcite carbonate, lime, limestone, talc, ceramic, iron kaolin, carborundum, bauxite, kaolin phosphate, coal and other materials, about 400 kinds of materials in total.

Specification :
Model and technical data of Zeolite Raymond mill machine

We are a leading manufacturer of Talc Raymond Mill in Shanghai, China. As a professionally managed manufacturer of this kind of machine, we have been in this line for many years, and now our spread over the world for the good quality and competitive prices.

Pebble Raymond mill machine (industrial grinding machine) devices:
Pebble Raymond mill machine (industrial grinding machine) mainly consist of hammer crusher, micro powder main unit, Frequency conversion classifier, powder collector, pulse dust cleaner, high pressure positive blower, air compressor, muffler, electrical apparatus control system, sound-proof room, crusher, bucket elevator, storage hopper, and vibrating feeder.

Features :
Finished powder products are in the 30-425 meshes, 0.613-0.033 mm, and yield can be up to 1-20 tons per hour. There are five types of Shanghai Clirik YGM&MTM series manufacture grinding mill, they are HYGM7815,YGM8314,YGM9517,YGM4121,MTM1600.

Application :
YGM&MTM series pebble Raymond Mill machine for glass pigment three roller mills is widely used in the fields of metallurgy, construction, chemical industry, mining, highway construction etc,. It is suitable for processing various non-flammable and non-explosive materials with Moh's hardness less than 9.3 and humidity less than 6%, such as quartz, feldspar, barite, calcite carbonate, lime, limestone, talc, ceramic, iron kaolin, carborundum, bauxite, kaolin phosphate, coal and other materials, about 400 kinds of materials in total.

Specification :
Model and technical data of pebble Raymond mill machine