New Items

• Higher output. Its output increases by 10%-20% comparing with 3 Roller Mills under the same power condition.
• Larger range of final fineness. Size of final product can be 0.613mm (30mesh) 0.033mm (425mesh). Some can reach the fineness of 0.013mm (1000 mesh).
• Good dust control. High Pressure Suspension Mill meets the requirement of national dust-dump standard.
• Easy to operate. The whole system is combined by some independent systems, and the cohesion between the systems is good.
• Excellent sealing. The multi-class seals are adopted to keep the grinding equipment tight closed.

Working Principle of Brucite Grinding Mill Machine

• After crushed by hammer crusher, the large materials become smaller pieces and are sent to the micro powder grinding mill.
• When the micro powder grinding mill is at work, the granulated materials are crushed and grinded by the rollers into particles below 47micron.
• The high-pressure air blower constantly inhales air within the micro powder grinding mill.
• Along with the high speed airflow, micronized materials are brought to the classifier.
• The qualified particles are screened and driven into the cyclone powder collector, finally exit from the discharging valve at the bottom;
• A small proportion of the fine powders, with airflow, moving to the dust cleaner. Filtered clean air will be emitted from the air outlet of muffler in the end.

Features and advantages of Brucite Grinding Mill Machine: 

Long lifecycle of spare parts

High safety and reliability

High fineness and flexible adjustment

Environment-friendly

As one of the best Wollastonite Grinding Mill manufacturers, CLIRIK has developped and manufactured more and more advanced grinding machine. The super-micro grinding mill is kind of popular micro milling machine. The ultrafine mill is invented by absorbing advantages from the same trade home and abroad. 

The high-pressure air blower constantly inhales air within the Wollastonite Grinding Mill and, in turn, the airflow with crushed materials are brought to the classifier whose high-speed impeller will screen the airflow: the unqualified particle size will fall and return to the mill for being reground while the qualified particle size mixed with air will go into the cyclone powder collector. Most of the qualified powders will fall and exit from the discharging valve at the bottom; a small proportion of the fine powders, with airflow, moves to the dust cleaner, and clings to the surface of the filter bags. At the same time, the fine powders clinging to the surface fall down by the sudden vibration of the filter bags, which is caused by the instantly ejected high-pressure gas controlled by the pulse valve. The materials from the above two lots are sent by the conveyor at the bottom to get finished powders packed. In addition, filtered clean air will be emitted from the air outlet of muffler in the end. 

Wollastonite Grinding Mill Features: 

This Wollastonite Grinding Mill is of lots features and benefits, such as the high efficiency in same condition of finished particle size and power of motor. The output of the micro milling machine is 40% higher than airflow mill and whisk mill. In same condition of material and finished particle size, the quick-wear part of the Wollastonite Grinding Mill is of high using rate and longer lifetime than traditional milling machine. Because there are no axle tree and bolt in the grinding an trum, there will be no wear out of bearing and sealing part and also no loose of bolts which will greatly improve the safety of the Wollastonite Grinding Mill. What's more, the Wollastonite Grinding Mill will greatly lighten polution and noise by using dust cleaner and muffler, which has achieved environmental protection requirement. 

After crushed by hammer crusher, the large materials become small ones and are sent to storage hopper by elevator, and then evenly sent to the upper distribution plate of the turnplate by vibrating feeder and sloping feeding pipe. 

When the grinding mill is at work, all the grinding rollers are rolling in the ring, and the materials are driven to the edge of the turnplate by the centrifugal force and fall down into the grinding chambers where the materials are repeatedly pressed, crushed and grinded by the rollers.

Features of Grammite Grinding Mill: 

High safety and reliability

Working principle of Iron Oxide Grinding Mill Machine for sale 

• It can greatly reduced the dust pollution. 
• High efficiency and low consumption
• High-end material make the machine can work long time. 
• Every particle size.
• High safety performance and good stability.
• Automatic device and easy operation.

Types of Clay Grinding Mill:

five models: HGM80, HGM90, HGM100, HGM125and HGM1680L

finished production fineness: 250meshes-2500meshes, 5-74 micron

the capacity (ton/hour) ranges from 0.4T/H to 30T/H

Clay Grinding Mill has been widely used in making fine powder or micro powder, CLIRIK Clay Grinding Mill is applicable to non-flammable and non-explosive materials with hardness less than 6, such as the calcite, chalk, limestone, dolomite, kaolin, bentonite, talcum, talc, magnesite, illite, pyrophyllite, vermiculite, sattapulgite, rectorate, diatomite, barite, gypsum, alum earth, graphite, fluorite, variscite, potash ore floatstone,etc.

As one of the best Kaolin Grinding Mill Machine manufacturers, CLIRIK has developped and manufactured more and more advanced grinding machine. The super-micro grinding mill is kind of popular micro milling machine. The ultrafine mill is invented by absorbing advantages from the same trade home and abroad.

After crushed by hammer crusher, the large materials become small ones and are sent to storage hopper by elevator, and then evenly sent to the upper distribution plate of the turn plate by vibrating feeder and sloping feeding pipe. When the grinding mill is at work, the main bearing and each dial are driven by electromotor through reducer, and all the grinding rollers are rolling in the ring channels driving by dial through plunger. The materials are driven to the edge of the turn plate by the centrifugal force and fall down into the grinding chambers. The high-pressure air blower constantly inhales air, airflow with crushed materials are brought to classifier whose high-speed impeller will screen the airflow: The unqualified particle size will fall and return to the mill for being reground while the qualified particle size mixed with air will go into the cyclone powder collector. Most of the qualified powders will fall and exit from the discharging valve at the bottom; A small proportion of the fine powders, with airflow, moves to the dust cleaner. The materials from the above two lots are sent by the conveyor to get finished powders packed. In addition, filtered clean air will be emitted from muffler in the end.

Features of Micro Pulverizer:

High Efficiency

• The application of pulse bag filter and muffler greatly alleviates dust pollution and noise.
• Advanced intelligent speed control device
• Convenient adjusting, more uniform particle size.

HGM series micro powder grinding mill mainly consist of main unit, classifier, dust cleaner, powder collector, blower, muffler, hammer crusher (can be replaced by jaw crusher, bucket elevator, sound-proof room, storage hopper, vibrating feeder and so on. 

Product details 

• Raw materials: calcite, chalk, limestone, dolomite, kaolin, gypsum, and talc etc, totally more than 100 kinds of materials.
• Capacity: 0.5-30t/h
• Finished Size: 150-2500 mesh 100-5m
• Application: widely used in small and medium mining, chemicals, building materials, metallurgy, refractories, pharmaceuticals, cement and other industries.
• Shipping ports: Shanghai, China
• Delivery: 15 days after received the deposit 

Gypsum Grinding Mill manufactured by Shanghai Clirik Machinery Co. Ltd is widely used for making micro powder of gypsum. It can also process stone materials with moisture content less than 5 percent and hardness less than 6 levels on Mohs scale. The materials which can be processed include gypsum, kaolin, talc, limestone, barite, dolomite, calcite, marble, bentonite, mica, graphite and many others. The finished powder particles size can be 3000 mesh.

Through the long-term research about gypsum characteristics and field investigate production process of gypsum processing factory this mill overcome various problems appeared in the process of gypsum making. The gypsum grinding mill is the result of our technical staff after years of accumulated experience and test innovative, it can be used not only for gypsum powder processing but can also be used to grind other stone materials.

Application:

• It is widely used in the industries like mica mill, calcite mill, barites mill, calcium carbonate mill, dolomite mill. Gypsum grinding mill is the preferred stone machining equipment for the industry.

Features:

• Higher efficiency
• The production capacity of the mill is twice than the jet mill and agitation mill
• Longer working life of spare parts
• The roller and ring are made up of special material, which improves the grinding efficiency
• High safe and reliable
• There are no rolling bearings and bolts in the grinding cavity which eliminates the problems caused by bolts shedding or wear of bearings and seal components
• Powder of high fineness is produced
• Fineness can reach D975m
• Environment friendly
• Reduced noise and air pollution due to the application of pulse dust collector and muffler

• Capacity:20-200 T/H
• Feeding size:25 Mm
• Output Size:30-400 Mesh

Brief Introduction of Ball Mill from China Manufacturer:

• Suitable for grinding material with high hardness
• The shape of the final products is circular
• No pollution for the powder with ceramic ball
• Stable performance
• Easy installation
• The capacity and fineness can be adjusted by adjusting the diameter of the ball

Energy-saving Ball Mill Grinder for grinding various ores and other materials, are widely used in mineral processing, building materials and chemical industry can be divided into dry and wet grinding. According to different ways of discharge can be divided into the two types----type and overflow type.

Working principle of Energy-saving Ball Mill Grinder:

Classification of Energy-saving Ball Mill Grinder:

Energy-saving Ball Mill Grinder for grinding various ores and other materials, are widely used in mineral processing, building materials and chemical industry can be divided into dry and wet grinding. According to different ways of discharge can be divided into the two types---lattice type and overflow type.

Application of Energy-saving Ball Mill Grinder:

Energy-saving Ball Mill Grinder is the key equipment for grinding after the crushing process, which is widely used in the manufacture industries, such as cement, silicate, new building material, refractory material, fertilizer, ferrous metal, nonferrous metal and glass ceramics and can be used for the dry and wet grinding for all kinds of ores and other grind-able materials.

Features of Energy-saving Ball Mill Grinder:

The main parts of the energy-saving Ball Mill Grinder are feeding part, discharging part, turning part, and transmission parts (reducer, small transmission gear, motor, electric control). The hollow axis adopts the cast steel, lined with removable, rotary gear adopts casting hobbing process, the body inlaid cylinder liner wear, has good wear resistance. The machine is running smoothly, working reliably.

Energy-saving Ball Mill Grinder changes the intrinsic grinding machine structure. Its body and ground plank are an integral whole. So when fixing, it can be lowered on a plane surface once only. Use double tiered roller axletree with centripetal spherical surface as the support of the host axletree can reduce energy cost by 30%. The intrinsic grille pattern forcing evacuation is instead by over fall pattern controlling one. This can improve the milling of the granule and the quantity dealt with is reduced by 15-20%.

• This Micro Powder Mill has lots of features and benefits:
• Higher grinding efficiency with great motor power and lower power consumption
• The output of the micro powder mill is 40% higher than airflow mill and whisk mill
• Ultra-fine powder processing
• Sturdy construction with a longer service life
• Safe and reliable to use in the grinding activity
• Intelligent control system
• Environmental protecting, less noise and air pollution by the use of muffler and dust cleaner

Working Principle:

The powder mill rotates under the action of main motor and reducer. Raw materials, along with the elevator, spiral conveyer fall in the center of powder mill and next they move to the edge of the mill under centrifugal force. After being crushed by the hammer crusher, the large materials are crushed into small particles and are further sent to storage silo by elevator. The materials continue to move to the edge of powder mill and then it is brought to the multi-rotor powder concentrator by the airflow of high pressure fan. The powder which meets the requirements falls and exit from the discharging valve at the bottom which enters the dust collector along with airflow and clings to the surface of the filter bags and the ones fail, falls on the powder mill for re-grinding. The fine powder which has clanged to the filter bag falls down by sudden vibration which is caused by the instantly ejected high-pressure gas controlled by the pulse valve. The final powder is then transported to the bottom by elevator to get finished powders packed.

For more details of this Micro Powder Mill, you can contact us. CLIRIK will provide you with the best micro milling machine with perfect service and at a very cost effective rate.

• High pressure grinding mill
• Big input size, average output size
• Low energy consumption
• Eclipsed form multiple seal grinding device

• Ultra Grinding Mill is used for making micro powders and it is widely applied in the industries of mining, metallurgy, chemistry, construction, cement, ceramics, refractory materials and many others. The purpose of the mill is to produce super fine material with hardness less than 9 in Mohs scale and moisture less than 6 percent; it can grind up to 200 kinds of materials.

• The mill consists of hammer crusher, storage hopper, and bucket elevator, vibrating feeder, inverter classifier, main unit, pulse de-duster system, air compressor, high pressure positive blower and electrical control systems.

Working Principle:

The grinding rollers roll in the ring and the material is driven to the edge of the turn plate by the centrifugal force and fall into the grinding chamber. There the material is repeatedly crushed and pressed under extreme force by the rollers. A high pressure air blower within the grinding mill continuously inhales the air and that in turn forces the crushed fine material to filter through the screen, where the unqualified material stuck and fall and is returned to the mill for being reground. The qualified fine material mixed with air goes into the cyclone powder collector, most of it fall and exit from the discharge valve at the bottom. A small proportion moves to the dust cleaner and clings to the surface of filter bags, at the same time fine powder clang to the surface falls down by sudden vibration of the filter bags. The material from the two lots is sent by the conveyer belt at the bottom to get finished powder packing. The filtered air is emitted through the air outlet of the muffler in the end.

• High grinding efficiency and saves 20~30% power consumption
• With increasing moisture content it can save more and more electricity
• Drying and grinding of raw materials with moisture content as much as 15%
• Used for crushing, drying, grinding, separating and conveying
• Low noises and less dust
• No direct contact between the grinding rollers and grinding disc, so its noises is 20~25 decibels lower
• Totally closed negative pressure operation has employed so, no dust during the operation
• Low wear rate of only 5~10g/t and little metallic pollution
• Capacity ranges from 20-300 T/H
• Feeding size is 100 mm
• Output size of the material ranges from 30 to 1000 mesh

• It is suitable for huge capacity producing and is widely used in grinding non-flammable and non-explosive materials under 9.3 Mohs hardness. It consists of the separator, grinding roller, panel, disc, classifier, blower, storage hopper, etc.

• The grinding disc in the mill is driven by the motor through the reducer. The material is fed through the inlet pipe and it falls into the grinding disc from the feeder opening. The material is then driven to the edge of the disc by the centrifugal force and is crushed into a fine powder by rollers. Then, the hot air from the nozzle takes the fine powder to a high efficiency classifier; the moisture is evaporated rapidly when the full heat exchange occurs between material and hot gas. The classifier separates the qualified powder and it is taken by the air to the powder collector where it is collected, while the unqualified powder is sent back for regrinding and the finished product is collected and delivered to a storage silo.

Professional 2-300 T/H Large Capacity Vertical Roller Mill

• High grinding efficiency: save 20~30% power consumption compared with the ball mill. With the increasing of moisture content, it can save more and more electricity.
• Strong drying capacity: dry and grind raw materials with moisture content as much as 15%.
• Mutifunction: crushing, drying, grinding, separating and conveying.
• Low noises and little dust: no direct contact between the grinding rollers and grinding disc, so metallic impact is avoided and its noises is 20~25 decibels lower. Totally closed negative pressure operation has employed by this vertical grinding mill, so there is no dust during the operation.
• Low wear rate and little metallic pollution: its metal wear is only 5~10g/t